How do you test a princess’s royal pedigree? By whether or
not she’s able to get a good night’s sleep if there’s a single pea under her
pile of 40 mattresses—at least according to Hans Christian Andersen’s fairy tale
“The Princess and the Pea.”
While the original tale is short, it has inspired other retellings (as fairy tales tend to do),
such as the Broadway musical Once Upon a Mattress. The original cast included actress and comedienne
Carol Burnett (who was nominated for a Tony Award in the role of Princess
Winnifred) and opened at Phoenix Theatre in New York in 1959 before moving to
In this tutorial, we’ll be designing an illustrated tribute
poster for the original production of Once
Upon a Mattress, though the design could just as easily be used for a
current production. We’ll use Illustrator’s basic shape tools and the Pen Tool
to layer shapes for the base of our illustration, and then we’ll add details and
texture with vector brushes and clipping masks, along with some fun typography.
What You’ll Need
The following resources were used to complete this tutorial:
1. Prepare Your Document
Open a new document in Adobe Illustrator. A typical size for
theatre and movie posters is 27 by 40 inches (by U.S. standards), but as
working with such a large document could make Illustrator a little sluggish,
feel free to use smaller dimensions (like 11 x 17 in. / A3) for the purposes of this tutorial.
If you’d like to use the same color scheme you see here, now
would be a good time to set up your palette and get the colors ready to go in
the Swatches panel. You can see the colors and their hex codes below. Just
enter each code into the Color Picker
window, hit OK, and drag the color
from the Fill box in your toolbar
over to your open Swatches panel.
Just as a side note, for the purposes of this online
tutorial, we’ll be working with RGB color (how colors display on
screens/devices), but if we were actually designing a poster to be printed, we
could want to design in CMYK color (which all printers use) or convert from RGB
to CMYK when preparing the file for printing.
2. Add a Background
Open a new layer and name it Background (to change the name, just double-click on the new layer
in the Layers panel and you’ll be
given a place to type in a new name). Fill
your whole artboard with the light blue color (
#B3C5AB) by using the Rectangle Tool.
If you didn’t do this at the beginning of the tutorial, install and
open the set of Airbrush
Brushes. We’ll be using these brushes to add some grainy texture to our poster, an effect that was common in illustrative styles of the 1950s
Pick a brush or two to add some texture in an oval shape in
the middle of your background. Use a stroke color that’s a bit lighter than the
There are a couple ways you can do this: completely freehand
using the Brush Tool, or start by
creating an oval outline with the Ellipse
Tool, apply one of the texture brushes as a stroke on the shape, and then fill in the empty
middle space by hand with a brush. This second technique is the one I opted
for, using Airbrush 13 for the outline and Airbrush 6 to fill it in. If you
want to make the effect a little subtler, select the brushed textures and lower
their opacity to around 60%.
- Time-saving tip: An
easy way to automatically generate a selection of tints and shades (or lighter
and darker versions) of a given color is to open up Illustrator’s Color Guide (Window > Color Guide). If you already have a color in the Fill
area of your toolbar, when you open the Color Guide, the top row will have your
selected color in the middle with its tints and shades to the right and left,
Lock the Background layer by clicking on the empty box to
the left of the layer name in the Layers
panel; a padlock icon will appear. Doing this keeps the elements on that
layer from moving around or getting in your way when you’re trying to work on
top of them.
3. Stack Some Mattresses
The princess’s pile of mattresses will be the main organizing
concept of our design. The princess will, of course, be perched on top, but the
mattresses will also double as space for the play’s title and other text.
Open a new layer and name it Mattresses. Try stacking a combination of rectangular and more “floppy”
shapes. For the straight-edged mattresses, choose the Rounded Rectangle Tool with a click-hold on the Rectangle Tool; select it from the menu
that pops up. For more freeform shapes, either start with the Ellipse Tool and then drag the shape’s
anchor points and handles until you get your desired look, or create your own
shapes with the Pen Tool.
The number of mattresses will depend on the specific shapes
and sizes you end up with, but you will want to make sure you leave a generous
cushion of space at both the top and the bottom of the artboard. You can also add a simple suggestion of a bed frame at the bottom if you like.
Include a few mattresses with larger heights or adjust some
you’ve already drawn; we’ll need these areas to place the text for the title of
As a finishing touch, don’t forget to hide a pea somewhere
This step is optional, but if you’d like to add some more
detail to the mattresses, this would be the time to do it. You can try drawing
some embellishments like stripes or polka dots and/or adding some texture like
what we placed in the background.
There will be an extra step in the process, though. After
adding your details or texture on top of the mattress shapes, you’ll want to
clip or trim those elements to the shape of each mattress. One way to do that
is with clipping masks. If you’re not familiar with this process, you can get
up to speed with our Quick Tip on clipping masks. Here’s what your work might look like before and
after making clipping masks:
Whether or not you decided to add extra details to the
mattresses, now’s the time to finalize their arrangement before we add text on
top. Feel free to change their shape, size, rotation, or color until you get a result you like.
Here’s what I ended up with, after creating multiple
clipping masks (sometimes two for a single mattress, layering textures with
other embellishments). For the textures, I went to the Color Guide to choose
colors that were a bit lighter or darker than the mattresses’ base colors and
applied them using Airbrush 13 again.
Lock the Mattresses layer before moving on to the next steps.
4. Place the Typography
Remember how we made some of the mattresses extra tall a
few steps back? That was so we’d have plenty of room to place the title of the
musical, which is our first order of business in this section. So open up a new
layer and call it something like Text or
I decided to split the title, Once Upon a Mattress, into two pieces (to be featured on two
mattresses). You could try different divisions depending on what works for your
- “Once upon a” is set in the font Trocchi in all lowercase
letters, sized to fill the width of the mattress, and rotated a bit to
match the tilt.
- “Mattress” is set in all uppercase letters in the font Steelfish, and again, scaled
and rotated to fit snugly within the shape of the mattress. To give the letters some movement, highlight one letter at a time with the Type Tool and then expand the Character panel, adjusting the Baseline Shift of each letter with the
up and down arrows.
Here’s what we have with the title placed:
If you want (and space allows), you can add some other text.
I’ve included the tagline “a new musical” and the name of the star of the show
on two more mattresses, set in the fonts Honey Script and Trocchi.
Lastly, fill up that empty space at the bottom of your poster
with a theatre name and date. The theatre name is set in the font Gone and
sized to be roughly the width of the bottom of the stack of mattresses. The
opening date is set using Steelfish
again. To fill the space more effectively, try adjusting the Tracking (or letter spacing) of both
elements to around 75–100 in the Character
5. Illustrate a Princess
Now it’s time to form a princess to perch on top of your
pile of mattresses. We can’t have a design inspired by “The Princess and the
Pea” without the eponymous princess, right?
Sometimes drawing or designing human figures (even “cartoonish”
ones) can seem difficult, but in this case, we’re really just repeating the same
techniques we’ve already been using: layering and manipulating individual
shapes to create a composition, then enhancing those basic shapes by adding detail and texture on top.
Let’s get started:
Create a new layer and call it Princess. You may find it helpful to first form the structure or “skeleton”
of the illustration by starting with basic outlined shapes. That’s what I’ve
done below to work out the pose and proportions of the figure, primarily using
the Pen Tool to form the torso and
arms, along with the puffy sleeves and full skirt of a dress/nightgown.
Keep using the Pen
Tool and/or shape tools to add the outlines of whatever main elements are still
missing in your illustration—in my case, the hands, feet, head, and hair. You
can save details like facial features for a later step.
At this point your princess may look a little
strange, a bit like a marionette puppet, but don’t worry; she’ll start to
come together quickly in the next step.
Replace those outlines with fill colors of your choice.
Adjust any shapes that aren’t looking right to you now that you see them in
To create the stripes on the dress that you see above, duplicate the shape that you’d like to apply striping to and move it off to the side of your artboard. Use the Pen Tool to draw dividing lines across the shape where you want to separate the colors. Then select all the lines and the shape and go to Window > Pathfinder > Divide. This will divide the shape according to the lines you drew, and you can select each segment using the Direct Selection Tool and change its color. Drag the striped shape back over to the artboard to sit on top of the original shape.
Now would also be a good time to add textures if desired, getting color variations from the Color Guide and using clipping masks as before. (Those individual shapes that you created in the outlining stage will make isolating and clipping the textures much quicker.)
Give your princess some personality by filling in the facial
features. I used the Pen Tool and Ellipse Tool for this, plus a texture
brush (Airbrush 2) for the rosy cheeks. Feel free to add some other fun
details, such as a crown or maybe some embellishments on the dress.
Admire your finished work!
Take a Bow
Good work, you did a lot in this tutorial—a little
illustration, a little typography, some texturing, and more! I hope you’ve
enjoyed combining various design elements and techniques to produce a finished
project in Adobe Illustrator, as well as digging into some of the program’s
hidden gems like the Color Guide.
As always, feel free to share how your project turned out or
ask questions in the comments section. Happy designing!
Source: Photoshop Tutorials +